L'emploi des métiers de l'électricité Site d'emploi en électricité et connexes : électroniques, mécaniques, automatisme...
Retour à la CVthèque
Obtenir coordonnées
Electrical & instrumentation technician
Plus de 10 ans d'expérienceContact
Réf. EL260921133132
Née le 01/01/1980
Mahdia
Tunisie
1980-01-01 https://www.electrijob.com/cv-candidat/260921133132/electrical-et-instrumentation-technician Female Mahdia Toute la France Tunisie 99000 Mahdia
Née le 01/01/1980
Mahdia
Tunisie
1980-01-01 https://www.electrijob.com/cv-candidat/260921133132/electrical-et-instrumentation-technician Female Mahdia Toute la France Tunisie 99000 Mahdia
Langues
Arabic
English
French
Italian
English
French
Italian
Permis
B
Ma recherche
Je recherche tout type de contrat, dans toute la France, dans le Batiment.
Formations
12/2003 : Bac +2
Industrial Electronics Technician – Brevet de Technicien Professionnel
Industrial Electronics Technician – Brevet de Technicien Professionnel
12/2001 : Bac
Baccalauréat – Section Technique
Baccalauréat – Section Technique
Expériences professionnelles
02/2025 - / : E&I Technician chez Gets Company – Hib, Hib
Conducted comprehensive E&I condition assessments on sewage pump stations and treatment plants; inspected MV/LV switchgear, MCC, transformers, cable trays, conduits and earthing; performed cable testing, generator set tests, motor tests; verified field instrumentation; compiled structured assessment reports with recommendations.
Conducted comprehensive E&I condition assessments on sewage pump stations and treatment plants; inspected MV/LV switchgear, MCC, transformers, cable trays, conduits and earthing; performed cable testing, generator set tests, motor tests; verified field instrumentation; compiled structured assessment reports with recommendations.
01/2024 - 02/2025 : E&I Technician chez Gets Company – Brega Oil
Executed maintenance, repair and calibration campaign on three spherical LPG tanks; installed pressure gauges, transmitters, radar level gauges and multi‑spot temperature transmitters; replaced instrumentation cabling and performed loop verification; delivered calibration certificates and as‑built mark‑ups.
Executed maintenance, repair and calibration campaign on three spherical LPG tanks; installed pressure gauges, transmitters, radar level gauges and multi‑spot temperature transmitters; replaced instrumentation cabling and performed loop verification; delivered calibration certificates and as‑built mark‑ups.
12/2022 - 12/2023 : E&I Technician chez Gets Company – Petrofac
Reviewed IFC documents, followed ITPs and MIRs, raised RFIs, performed MV/LV cable pulling and testing, installed cathodic protection, installed and tested transformer rectifiers, flagged NCRs and supported corrective actions.
Reviewed IFC documents, followed ITPs and MIRs, raised RFIs, performed MV/LV cable pulling and testing, installed cathodic protection, installed and tested transformer rectifiers, flagged NCRs and supported corrective actions.
10/2020 - 06/2022 : E&I Technician chez Oil & Gas Service Company (seip)
Contributed to Project Quality Plan, followed QA/QC schedule, managed material handling, coordinated installation packages, compiled FAT/SAT reports, installed conduit, cable‑trays, transformers, HV switchgear, UPS, grounding, and field instrumentation; performed calibration and pneumatic leak testing.
Contributed to Project Quality Plan, followed QA/QC schedule, managed material handling, coordinated installation packages, compiled FAT/SAT reports, installed conduit, cable‑trays, transformers, HV switchgear, UPS, grounding, and field instrumentation; performed calibration and pneumatic leak testing.
07/2018 - 03/2020 : E&I Commissioning Technician chez Spiecapag / Imi
Supervised installation activities, performed grounding checks, erected and terminated process and safety instruments, supervised cable laying, pre‑commissioned E&I cables, calibrated instruments, commissioned diesel generators, LV panels, UPS systems, fire & gas systems and field instruments; established Modbus and PROFIBUS communications.
Supervised installation activities, performed grounding checks, erected and terminated process and safety instruments, supervised cable laying, pre‑commissioned E&I cables, calibrated instruments, commissioned diesel generators, LV panels, UPS systems, fire & gas systems and field instruments; established Modbus and PROFIBUS communications.
02/2018 - 05/2018 : E&I Technician chez Geis – Al Waha / Omv
Verified skid arrival against vendor drawings, checked nameplates, inspected skid for transport damage, performed motor megger tests, verified MCC interfaces, earthing and bonding, and inspected instrumentation installations.
Verified skid arrival against vendor drawings, checked nameplates, inspected skid for transport damage, performed motor megger tests, verified MCC interfaces, earthing and bonding, and inspected instrumentation installations.
08/2017 - 01/2018 : Instrumentation Technician chez Kde Technologie
Read and interpreted electrical diagrams; maintained hydraulic/pneumatic control panels; verified SSV/SDV solenoid function; performed motor terminations and testing; calibrated level, pressure and temperature transmitters; verified 4–20 mA loop integrity and HART communication.
Read and interpreted electrical diagrams; maintained hydraulic/pneumatic control panels; verified SSV/SDV solenoid function; performed motor terminations and testing; calibrated level, pressure and temperature transmitters; verified 4–20 mA loop integrity and HART communication.
04/2017 - 06/2017 : E&I Technician chez Al Rida Oil Service
Installed cable trays, flow, temperature and pressure transmitters, and associated junction boxes; performed glanding and termination of instrument cables; pre‑commissioned E&I cables (IR and continuity tests).
Installed cable trays, flow, temperature and pressure transmitters, and associated junction boxes; performed glanding and termination of instrument cables; pre‑commissioned E&I cables (IR and continuity tests).
08/2016 - 10/2016 : Electrical Technician chez Eni Gaz – Medco Oil Service
Wired electrical cabinets and installed measuring instruments; installed cable trays and performed cable pulling, dressing, glanding and termination for lighting panels, DBs, junction boxes and control panels; performed IR and Hi‑Pot testing of power cables and transformer testing (vector‑group, BDV, turns‑ratio, etc.).
Wired electrical cabinets and installed measuring instruments; installed cable trays and performed cable pulling, dressing, glanding and termination for lighting panels, DBs, junction boxes and control panels; performed IR and Hi‑Pot testing of power cables and transformer testing (vector‑group, BDV, turns‑ratio, etc.).
10/2014 - 01/2016 : Electrical Technician chez El Nasser Contractors, Jerba
Performed IR and continuity testing of control and power cables; replaced the electrical control cabinet for the four ship engines; installed lighting, fire‑detection equipment and alarm systems in the control and engine rooms; repaired and reorganised wheel‑house equipment.
Performed IR and continuity testing of control and power cables; replaced the electrical control cabinet for the four ship engines; installed lighting, fire‑detection equipment and alarm systems in the control and engine rooms; repaired and reorganised wheel‑house equipment.
10/2008 - 02/2011 : E&I Technician chez Joannou & Paraskevaides (j&p)
Installed and calibrated flow, temperature, pressure, and level transmitters, vibration sensors, control valves, and MOV actuators; performed pre‑commissioning cable IR/continuity checks and witnessed grounding/earthing system testing.
Installed and calibrated flow, temperature, pressure, and level transmitters, vibration sensors, control valves, and MOV actuators; performed pre‑commissioning cable IR/continuity checks and witnessed grounding/earthing system testing.
02/2006 - 06/2008 : Elevator Technician chez Sme Elevator Company
Assembled, installed, repaired, and maintained elevators and stairlifts; adjusted safety controls, counterweights, and door mechanisms; performed scheduled preventive maintenance on construction sites.
Assembled, installed, repaired, and maintained elevators and stairlifts; adjusted safety controls, counterweights, and door mechanisms; performed scheduled preventive maintenance on construction sites.
Langues
Arabic
English
French
Italian
English
French
Italian
Permis
B
Atouts et compétences
Electrical & Power HV/MV/LV switchgear, MCC & transformer testing, Motor testing (IR, winding resistance, rotation), Cable installation, glanding, termination & testing, Cathodic protection (ICCP & galvanic), Instrument calibration & loop checking, Field instrumentation (PT, TT, FT, LT, control valves), DCS/PLC loop checking & commissioning, Radar tank gauging (FMCW) & MSTT systems, Fire & gas, ESD/SIS function testing, Hazardous area compliance (ATEX/IECEx), IEC standards (60364, 61439, 60947, 62271, 61511), ISO 9001:2015 quality procedures, ITP/ITR execution, FAT/SAT support & punch‑list closure, NCR reporting & corrective‑action support, As‑built mark‑ups & completion dossiers, Project planning & coordination, Team supervision & training
